80 mm 75 HP Cincinnati Extruder Co-Rotating Twin S

80 mm 75 HP Conical Cincinnati CM80HP
- Used 80 mm Cincinnati Milacron model CM80HP counter rotating conical twin screw extruder.
- Driven by a 75 hp brushless DC motor with powertec 3000 SCR contrrol.

For more details on 80 mm 75 HP Cincinnati Extruder Co-Rotating Twin S click here

50 mm 30 HP Extruder Co-Rotating Twin Screw

50 mm 30 HP Conical Krauss Maffei Feeder
- Used 1.96" (50 mm) Krauss Maffei type KMD-2-50KK twin screw extruder having (2) 50 mm counter rotating screws.
- Gearbox is direct driven by a 30 hp dc mmotor.

For more details on 50 mm 30 HP Extruder Co-Rotating Twin Screw click here

Buss Extruders

Buss Extruder
- Type: PLK100
- Year of building: 1987
- Screw: Single screw, 100 mm
- L/D: L = 7D (900 mm)
- Screw RPM: 50-300 RPM
- Engine: Piller, 17.5-77 kw, 500-2200 RPM
- Including:
a.

For more details on Buss Extruders click here

40 mm 40 HP Extruder Co-Rotating Twin Screw

40 mm 40 HP 33/1 Berstorff Model ZE40

- Used 40 mm Berstorff co-rotating, intermeshing twin screw extruder model
ZE40 having a 33/1 L/D ratio.
- Gearbox is belt driven by 40 HP DC motor with Reeliance SCR control.

For more details on 40 mm 40 HP Extruder Co-Rotating Twin Screw click here

Second hand Conical Twin Screw Extruders

- Dia: 45 mm Conical Twin Screw extruders or complete line for producing PVC pipes
- Year of manufacture: Not older then 1990
5 nos wanted

For more details on Second hand Conical Twin Screw Extruders click here

Two Cincinnati Milacron CM55 Conical Twin Screw Ex

- Electrically heated
- Air cooled
- 40 HP DC motors and SCR drive controllers
- One was new in 1988 and one in 1991.

For more details on Two Cincinnati Milacron CM55 Conical Twin Screw Ex click here

55 mm 40 HP Conical Cincinnati 1997 Temp Panel

Used 55 mm Cincinnati Milacron model E55 pinnacle, conical, counter rotating twin screw extruder. Has electrically heated, water cooled, vented barrel with vacuum pump. Has Milwaukee gear reducer modeel l0059RXT.

For more details on 55 mm 40 HP Conical Cincinnati 1997 Temp Panel click here

55 mm 40 HP Conical Cincinnati 1995

Used 55mm Cincinnati Milacron model CM55 HP counter rotating conical twin screw extruder. Driven by a 40 HP brushless DC motor with motor control, includes temperature panel, with barber coleman/cinciinnati instruments (3 instruments missing), vented barrel includes vacuum pump and clamp for head.

For more details on 55 mm 40 HP Conical Cincinnati 1995 click here

35 mm 12 HP Conical Cincinnati 1995

Used Cincinnati Milacron model CM35 conical twin screw extruder driven by 12.7 HP, powertech brushless DC motor with SCR control. Includes starve feeder, vented barrel with vacuum pump, and temperaturre control panel utilizing eurotherm 94 instruments (2 missing).

For more details on 35 mm 12 HP Conical Cincinnati 1995 click here

Deltaplast Extruder 4.5 inch

Used 4.5", 34/1 Deltaplast model D120-450-34V extruder having an eight(8) zone electrically heated, water cooled (two zone closed loop), side vented barrel at a nominal 43" centerline height. Gearbox is belt driven by a 250 HP DC motor with reliance flexpak 3000 SCR control.

For more details on Deltaplast Extruder 4.5 inch click here

Sino Alloy Twin Screw Co Rotating Extruders

2 Sino Alloy twin screw co rotating 72 mm x 38 L:D extruders with mixing blending systems by K-Tron, side feeders, vented, barrel segment design and screw segment type configuration, screen changers, water ring pelletizers and standard strand die, and water bath, air strippers and stand pelletizers, vibrating shaker classification tables.

For more details on Sino Alloy Twin Screw Co Rotating Extruders click here

55 mm 40 HP Conical Cincinnati 1996

Used Cincinnati Milacron 55 mm conical twin screw extruder. Counter rotating design, driven by a 40 HP brushless DC motor with powertec 2000 motor control. Extruder pinnacle. 460 volt AC input new 19996.

For more details on 55 mm 40 HP Conical Cincinnati 1996 click here

35 mm 12 HP Conical Cincinnati 1996

Used 35 mm Cincinnati Milacron conical twin screw counter rotating extruder. 460 volt AC input. Includes 9-zone temperature control panel (2 instruments missing), which includes 7 barber Coleman / Eurrotherm instruments.

For more details on 35 mm 12 HP Conical Cincinnati 1996 click here

6" Egan Extruder Line

Used 6" 32:1 Egan extruder having electrically heated, water cooled (closed loop) non-vented barrel at approximately a 42" centerline height. Gearbox is a Philadelphia model 3218xs having a 16:1 reducction ratio and is direct driven in a wrap-around manner by a 400 hp dc motor.

For more details on 6" Egan Extruder Line click here

PVC Zipper Extrusion Line

Complete Extruder - 45 mm dia: Taiwan Capacity - 15kgs / hrs - 10 HP - 1
Auto Hopper feeder cum dryer unit: Taiwan - 1 HP - 1
Auto controlled Chiller unit: Taiwan - 1 HP - 1
Insulated Heater set: T

For more details on PVC Zipper Extrusion Line click here

6" 32:1 NRM Extruder

Used 6" 32:1 NRM extruder having an electrically heated, liquid cooled (closed loop) barrel at a 42-1/2" centerline height but currently mounted on movable base supplying total 84" center line height..

For more details on 6" 32:1 NRM Extruder click here

4.5" Vent 300 HP HPM

Used 4.5" 38/1 L/D HPM model 4.5 tm 38 extruder having a six zone electrically heated, water cooled (closed loop) and side vented barrel at approximately a 42" centerline height. Panel has ten zones oof eurotherm model 808 controllers.

For more details on 4.5" Vent 300 HP HPM click here

3.5" sterling Vented Extruder

Used 3.5" sterling 30/1 L/D vented extruder. Extruder is equipped with side vent, electrically heated, water cooled barrel, belt driven to 100 HP reliance DC motor with SCR control. Has hopper with pnneumatic receiver and feed throat magnet.

For more details on 3.5" sterling Vented Extruder click here

Twin Screw Extruder

- Make: Rolff Kestermann, Germany.
- Type: Counter Rotation.
- Screw Diameter: 107 mm
- L/D Ratio: 14:1
- Screw RPM: 0-33
- Motor: D/C Motor with Thyristor Drive.
- Motor: 40 HP
- Venting Port:: 1 Nos - Natural Vent.

For more details on Twin Screw Extruder click here

Single Screw Extruder Line

Make: H K Industries, Delhi

Dia = 50 mm; L:D=32

15 kW DC motor Kirloskar make with variable speed drive.

5 heating zones, individually temperature controlled with thermocouples and digital teemperature controllers.

For more details on Single Screw Extruder Line click here

Single Screw Extruder Line

Make: R R Engineering, Mumbai

Dia = 75 mm; L:D=26

22 kW AC motor with variable speed drive from ABB.

5 heating zones, individually temperature controlled with thermocouples and PID controllerrs.

For more details on Single Screw Extruder Line click here

Twin Screw Compounding Extruder Interplast Line

Dia=42mm; L:D=40

37 kW DC motor Crompton make,
Variable drive from Continental.

8 heating zones, individually temperature controlled with thermocouples and PID controllers. Heating by aluminiuum cast-in heaters.

For more details on Twin Screw Compounding Extruder Interplast Line click here

1.25 24/1 Davis Standard Pedestal Extruder

Used Davis standard pedestal extruder having a 1-1/4" 24:1 three zone air cooled barrel. Gearbox has a reduction ratio of 15:1 and is driven by a 5 HP DC motor. With integral control panel. Extruder hheight and angle are adjustable.

For more details on 1.25 24/1 Davis Standard Pedestal Extruder click here

0.75 24/1 Killion Extruder

Used 3/4" 24/1 Killion extruder having a three zone electrically heated, air cooled barrel at a 52" centerline height. Gearbox is belt driven by a 1.5 HP DC motor. Water cooled feed throat. Includes ssix zone control panel with geftran instruments, penta power drive and thru the door disconnect.

For more details on 0.75 24/1 Killion Extruder click here

88 MM 60 HP Parallel Maplan Extruder

Used American Maplan 88 mm 24/1 L/D counter-rotating parallel screw twin screw extruder. Driven by 60 HP DC motor with SCR motor control. Includes temperature control panel, starve feeder, reported 188,000 hours use.

For more details on 88 MM 60 HP Parallel Maplan Extruder click here

8" HARTIG Extruder Plastic

Used 8" Hartig 32/1 L/D extruder. Has electrically heated liquid cooled, non-vented barrel. Direct connected to 700 HP DC motor with SCR control. Includes temperature control panel, but no temperaturee controllers.

For more details on 8" HARTIG Extruder Plastic click here

90mm Barmag Extruders

Used 90mm Barmag 30/1 L/D non-vented extruder. Barrel centerline height 39", electrically heated. Extruder is type 9 E10/30 D. Gearbox model 9 E805-32/6V. Has water cooled top center feed throat 4.5"" x 6".

For more details on 90mm Barmag Extruders click here

70 mm Co-Rotating Twin Screw Extruder

Used 70mm Werner & Pfleiderer model ZSK 70 co-rotating twin screw extruder. New 1995, has electrically heated water cooled barrel, direct connected to 300 HP DC motor with SCR control. Motor is 1750/22000 RPM.

For more details on 70 mm Co-Rotating Twin Screw Extruder click here

47mm JSW Co-rotating Twin Screw Extruders

Used 47mm JSW co-rotating twin screw extruder, Model Tex 44 XSST-45.5 BW-6 V. Has 42 L/D, co-rotating screws maximum 474 RPM screw speed. Has a 12 barrel section, including 3 vent sections and 3 side feed.

For more details on 47mm JSW Co-rotating Twin Screw Extruders click here