97mm Berstorff Ultra Torque Co-rot. Twin Screw Ext

Model: ZE90AX31DUT
- 97mm diameter intermeshing screws
- 31:1 L/D ratio
- Electrically heated
- Water cooled barrel
- Six sections: Four (4) closed, one (1) feed (open) and one (1) vacuum vent seection
- Gearbox has a reduction ratio of 5.

For more details on 97mm Berstorff Ultra Torque Co-rot. Twin Screw Ext click here

Berstorff ZE130A Twin Screw Extruder

Model: ZE130A x 28D
- Capacity 2.5 tons per hour
- 28:1 L/D
- 133 mm diameter co-rotating screws
- Max screw speed min 30 rpm, max 350 rpm.
- Electrically heated, water cooled.
- Includes gearrbox by 1000 KW (1500 hp) motor.

For more details on Berstorff ZE130A Twin Screw Extruder click here

170mm Coperion Werner & Pfleiderer Twin Screw Co-r

Model: ZSK-170 W-1750 5G
- Screw diameter: 170mm (7'')
- Screw length: 2500mm (100'')
- Screw speed: +/- 198 rpm
- L/D 14.7, co-rotating, electric heating on housing no. 2, 3, 4 and 5 (65.8 KW (888hp)),
- Motor DC 760 KW (1013 hp), 6000 Volt
- Without switchgear, used on DMD
- Floor space 14.

For more details on 170mm Coperion Werner & Pfleiderer Twin Screw Co-r click here

120mm Werner & Pfleiderer Twin Screw Extruder

ZSK 120 Werner & Pfleiderer twin screw plastic extruder (co-rotating)
- Motor 700 KW 1495 rpm, 380V/50 hz/3ph
- Machine was completely rebuilt in Germany during 2003 including gearbox and all
electtrics / Siemens PLC control.

For more details on 120mm Werner & Pfleiderer Twin Screw Extruder click here

6" Gloucester Extruder

Used 6" 30:1 Gloucester extruder model 266-01 having a six zone electrically heated, water cooled barrel at approximately a 42" centerline height. Gearbox is direct driven by a 400 hp Baldor DC motor with free standing Saftronics SCR control (SCR mfd.

For more details on 6" Gloucester Extruder click here

Welding Engineers Twin Screw Co-rotating Extruder

Model: HT30MM (rated 225psi at 650 Degree F)
- Non-intermeshing
- Screw diameter: 30mm (1.2")
- Barrels: 12- barrels 180mm (7") each (total length 2160mm or 85.25")
- L/D: 69/1
- Motor: 25 hp (noo controls or electrical)
- RPM's: 500
- Heating/cooling: Oil (heaters not included)
- Vented with 4 vents total: (2) automated self cleaning and (2) are atmospheric
- Liquid injection valves 2 (one each before self cleaning vent)
- Was used to produce Latex rubber.

For more details on Welding Engineers Twin Screw Co-rotating Extruder click here