45 mm Kuhne Extruders

Model: KS45-24D


- One (1) used 45 MM Kuhne single screw extruder

- 45 MM(1.77") diameter screw

- 24:1 l/d

- Electrically heated

- Air cooled

- Jacketed feed section with hopper

- 4 barrel zones



For more details on 45 mm Kuhne Extruders click here

1.5" Extruders

1) One (1) used extruder, 1.5" diameter 24:1 L/D barrel


- No screw

- Electrically heated

- Air cooled

- Three barrel zones

- Three die zones

- 11.2:1 Koellmann gear box

- 7.5 HP DC motor



2) One (1) used 1.



For more details on 1.5" Extruders click here

1.5" Davis-Standard Extruder

One (1) used Davis-Standard extruder


Model: DS-15

- Pedestal mounted

- 1.5" diameter 30:1 L/D barrel with screw

- Electrically heated

- Air cooled with five barrel zones and one die zone

- 16.5



For more details on 1.5" Davis-Standard Extruder click here

4.5" Macroplast Extruder

Model: ME-2-45026A1S-080-AC200V5


- One (1) used 4 1/2" Macroplast Extrusion Technology extruder, 26:1 L/D, electrically heated, air cooled barrel at a 24" centerline height.

- Gearbox has a reductiion ratio of 27.



For more details on 4.5" Macroplast Extruder click here

4.5" Deltaplast Single Screw Extruder

Model D12-45O32


- 32:1 L/D, electrically heated, water cooled, water system with pump, jacketed feed section, side vented, 12 zone control panel, 15.745:1 gearbox ratio, 200 hp DC motor with SCR cont



For more details on 4.5" Deltaplast Single Screw Extruder click here

90 mm Plastic Extruder

We are looking for plastic extruder with the following specification:


- 90 mm +/- with 150 hp motor

- Good sleeves, screws, gearbox & motor

- No heater

- Functional over form





For more details on 90 mm Plastic Extruder click here

53" x 24" HPM Up stack 3-Roll Stack

Model: SHII


- Used 53" Wide HPM 3-roll chrome roll stack

- Each roll is

- 24" O.D.

- Includes (3) pumps and heat exchangers

- 8" X 53" Wide rubber pull roll assembly, and 14' cooling conveyor..



For more details on 53" x 24" HPM Up stack 3-Roll Stack click here

40 HP Nelmor 1974 DC/SCR

- Used 2.5" nelmor 24/1 l/d non-vented extruder


- Model #2524s, serial #74031070.

- Has electrically heated water cooled barrel including closed loop water cooling system.

- Belt driven by 40 hpp dc motor with Emerson SCR controller.



For more details on 40 HP Nelmor 1974 DC/SCR click here

150HP DAVIS STD 45T DC/SCR

Used 4.5" Davis standard 24/1 l/d non-vented extruder.


Model: 45T

- Gearbox

- Has electrically heated air cooled barrel, includes hopper and AEC color feeder, belt driven from 150 hp dc motor witth SCR control.



For more details on 150HP DAVIS STD 45T DC/SCR click here

PVC Extruder

We are looking for PVC extruder for profiles with the following specification:


- Capacity: 250 to 350 kg/hr

- Size 200 mm to 800 mm





For more details on PVC Extruder click here

8" Prodex Extruder

- Quantity: 1


- One (1) used 8" Prodex extruder

- 24:1 L/D

- Electrically heated

- Water cooled

- Jacketed feed section

- 8 barrel zones Lufkin gear box with 27.72:1 ratio

- 1.5 service factor




For more details on 8" Prodex Extruder click here

6" NRM Extruder, 24:1 L/D

- Quantity: 1


- One (1) used 6" NRM extruder

- Electrically heated

- Water cooled barrel

- 500 hp DC motor with VFD inverter

- Temperature control panel with Barber Coleman controllers



(For im



For more details on 6" NRM Extruder, 24:1 L/D click here

6" GEC Extruders

1) 6" GEC Extruder, 24/1 L/D, Vented, 300 HP


Model: 266-001

- Quantity: 1

- One (1) Used 6" Gloucester Engineering 24/1 vented extruder

- 300 hp DC motor

- Electrically heated/water cooled barreel with closed loop water cooling system, with side vent located

- 61" from discharge, with barrel mounted temperature control panel

- 5 zone barrel temperature controls

- die and screen changer temperature controlled



2) 6" Gloucester Extruder, 24:1 L/D

Model: 266-001

- Quantity: 1

- One (1) Used 6" Gloucester Engineering extruder,

- 24/1 l/d, vented

- Electrically heated

- Water cooled barrel

- 5 zone barrel,

- Jacketed feed throat

- 14.



For more details on 6" GEC Extruders click here